JM 1ST APPROACH

Corroseal® is a water based rust converter combined with an unpigmented, high quality, latex paint primer. The converting agent turns rust into a barrier layer of black, non-rusting magnetite, plus other inert substances. The primer acts as a bonding agent for oil-based epoxy, enamel, acrylic and urethane. Corroseal is recommended for use on steel surfaces as a rust converter/paint primer. Corroseal protects against future rusting and can be used on welds. It eliminates the need to mechanically blast the steel to white metal, and is designed for use on water blasted surfaces that re-rust. Non-flammable, non-corrosive.

Corroseal is ideal for such diverse projects as roof restoration, propane tanks, vehicles, ship holds, hatches and decks, storage tanks, garden gates, patio furniture, window frames, farm equipment, gas pipelines, fuel tanks, and storage containers.

Coverage

1 gallon of Corroseal covers approximately 200 sq. ft. in a 10 mil coat (200-250 microns) to produce a 2.5-3 mil DFT to cover anchor profiles for estimating purposes. Converts heavy rust over 20-30 mils deep. Two (2) coats will convert up to 150 mils of rust. Actual surface conditions and thickness of rust will dictate the amount of Corroseal® needed. Heavy rust depths require a longer cure to 48 hours before overcoating.

Download the Material Safety Data Sheet (MSDS) for Corroseal.

Add Your Tags: